Start at the Catalog...

Sectional Doors

 

Operators

Loading Docks

Rolling Doors

Callout

Popular Manufacturers

X

Clopay Special Application Doors

passdoors

Pass Doors

Pass doors are ideal in applications where space is too limited for the installation of a standard entry door. They conserve energy by allowing building access via a smaller opening versus the entire sectional door, this minimizes wear and tear on the door as well saves electric operator cycles. In inclimate weather, the heat or cold distribution between inside and outside of the building is minimized, conserving additional energy costs.

Sizes: Pass doors are available on 3720, 3722, 3200 and 3220 insulated models as well as 520 and 524 series non-insulated commercial door models.

Download Brochure
breakaway-doors

Breakaway Bottom Sections

Clopay’s Break-Away Bottom Section releases from the track and will swing up to a full 90 degree angle inward or 45 degrees outward, preventing further damage to the door. The bottom section snaps back into place in less than a minute. The inside of the section also has fiberglass protective panel to prevent damage to the door. There is an optional inside slide lock provides additional security. Padlock may be applied.

Requirements: Doors must have at least 24″ of hi-lift and 36″ of headroom. Not compatible with door drop safety device/bottom brackets or doors requiring a double torsion shaft.

Download Brochure

Chain Link & Screen Security Doors

chain-link-security811

Model 811

Panel Design: 2-1/2″ x 1-1/2″ aluminum frame
Panel Inserts: 11 gauge galvanized steel chain link with 2″ diamond openings
Panel Thickness: 1-1/2″ thick aluminum
Joint Design: Flat block meeting rail
Thermal Conductivity: None
Hardware: Commercial grade hinges, rollers and brackets
Colors: Mill finished aluminum, powder coating optional
Limited Warranty: 1-year material and workmanship

Download Brochure
812

Model 812

Panel Design: 1-1/2″ or 1-7/8″ thick extruded aluminum rails
Panel Inserts:
304 stainless steel in 12 x 12 or 30 x 30 mesh
Panel Thickness:
1-1/2″ or 1-7/8″ thick
Joint Design:
Interlocking rails
Thermal Conductivity:
None
Hardware:
Commercial grade hinges, rollers and brackets
Colors:
Mill finished aluminum, powder coating optional
Limited Warranty:
1-year material and workmanship

Download Brochure